The hydraulic shears Model QC12Y are built with a length from 3 to 8 and a cutting capacity from 6 to 40 millimetres.  

Frame : it is in made under rolled, welded and strengthened steel in order to ensure the maximum rigidity. 

Cylinders : at double effect, they are in steel and lapped; shafts are also in steel and hardened.  

Blade holder : it runs on a vertical table and it is directly controlled by two standard cylinders and it is driven by a roll-bearings system. 

Hold-down cylinders : they are independent, therefore the thightening force is automatically adjusted in relation to the thickness of the sheet to be cut. 

Blades : both the top and bottom  blades are at 4 cutting edges.

Working cycles : single and automatic. 

Cutting angle adjustment : it is carried out through push-buttons integrated into the polycarbonate control panel. Operation is hydraulic.

Blades gap adjustment : it is carried out by acting on two leverisms placed outside the housings.